350 MHz to 4.2 GHz, 0.15 to 150W
RF Power Sensor - Extended Frequency
The 7020-1-020101 RF Power Sensor is an economical, plug and play solution to your power measurement needs. The 7020 determines and reports Forward and Reflected True Average Power and VSWR over a wide frequency range of 350 MHz to 4.2 GHz. It also never requires field calibration, only requires factory calibration once per year and is traceable to National Institute of Standards and Technology (NIST).
Applications
- WPS measures: Analog Cellular, Digital Cellular, 3G, 4G, Tetra, APCO/P25, Trunking, CDMA, TDMA, WCDMA, GSM, Transportation, Tactical Military, Radar, Avionics, Marine, LMR, Analog Broadcast, Digital Broadcast, GSM, GPRS, EDGE, UMTS, HSDPA, Bluetooth, Fire, GPS, NPSPAC, Paging, Project 25, Public Safety, Telematics, Utilities, WIMAX and WLAN.
- Measurements performed: Forward and Reflected
- Calculations Performed: VSWR and True Average Power
Standard Accessories: Sealatch USB Cable, VPM3 Virtual Power Meter Software, 7020 Instruction Manual, VPM3 Instruction Manual
Example set-up of 7020 Series, Power Sensor and VPM3, Virtual Measurement Software.Laptop, and termination not included.
Item Name
Basic Power Sensor
Frequency Range
350 MHz to 4.2 GHz
Power Range
0.15 W to 150 W
Measurement Accuracy
+/- (4% of reading + 0.05 W)
(above 35 °C or below 15 °C add 3%)
Min Forward Power for Reflected Measurement
5.0 W
Peak-Average Ratio
12 dB, Max.
Insertion Loss
0.1 dB, Max.
Calibration Interval
Annually (Recommended)
Upgradeable
Firmware is Field-Upgradable via the USB Port
Interface
Protocol: USB 2.0
Connector: USB Type ‘B’ with “SeaLATCH” locking USB connector
Data Logging: with VPM3 Software
Power Supply
Source: 5Vdc from USB host
Current Draw: 35 mA
Operating Temperature
-30 °C to +60 °C (-22 °F to +140 °F)
Storage Temperature
-40 °C to +80 °C (-40 °F to +176 °F)
Humidity
95% (non-condensing)
Altitude
4,572 m (15,000 ft.)
Mechanical Shock and Vibration
MIL-PRF-28800F class 3
Standards Compliance
CE: European Standard EN 61326-1:2006 – Electronic Equipment for Measurement, Control and Laboratory Use – EMC Requirements in accordance with EMC Directive (2004/108/EC)
RoHS: Compliant
Dimensions
4.8 in x 2.6 in x 1.3 in [Nominal]
(122 mm x 66 mm x 32mm)
Weight
1.0 lbs (0.45 kg) [Nominal]