Filter-Products  +


Bird - The RF Experts
20-37-06
20-37-06

20-37-06, 144-174 MHz, Series-Notch Cavity Filter passes a relatively wide band of frequencies while rejecting a very narrow band of frequencies. It is equivalent to a series-tuned circuit. Notch depth is variable from 15-25 dB. Pass and notch frequencies must be known so that the optimum loop assembly can be used. This is the best filter for very close separations (200-400 KHz) in UHF applications.

  • Various Low-Loss High-Rejection Models to choose from.
  • All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
  • Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.

Cascading Filters
All cavity types mentioned above may be cascaded to achieve an arithmetic sum of individual filter attenuation. Up to 6 dB of additional attenuation can be achieved when the proper length of cable is used to interconnect the cavities. (This additional 6 dB does not occur in the filter passband but only at frequencies where moderate to high attenuation occurs.) A TX RX system specialist can assist you in ordering the proper length of interconnecting cable for your frequencies.

Cavity Filters
20-37-06
Downloads:
product specifications:
Item No
20-37-06
Item Name
144-174 MHz, Series-Notch Cavity Filter
Frequency Range
144-174 MHz
Insertion Loss vs Frequency Separation

(w/ dual cavity, notch depth @ 34 dB)
<3.5 dB @ 50 kHz
<0.5 dB @ 250 kHz
<0.5 dB @ 500 KHz
<0.4 dB @ 1 MHz

(w/ dual cavity, notch depth @ 44 dB)
<2.0 dB @ 100 kHz
<0.6 dB @ 250 kHz
<0.5 dB @ 500 KHz
<0.4 dB @ 1 MHz

Impedance Ω
50
VSWR
1.5:1 max.
Max Power
80 W @ 50 kHz
150 W @ 100 kHz
350 W @ 250 kHz
350 W @ 500 kHz
350 W @ 1 MHz
Cavity Length - Electrical
1/4λ
Temperature Range
-30 to +60 °C
Cavity Diameter
10
Number of Cavities
2
Cavity Height
26", w/ tuning rod extended, 38" max.
Width
10
Depth
10
Connectors
N
Weight
45 lbs.