Filter-Products  +


Bird - The RF Experts
11-70 Series
11-70 Series

11-70 Series, 450-470 MHz, Bandpass Cavity Filters pass one narrow band of frequencies and attenuates all others with increasing attenuation above and below the pass frequency. It is equivalent to a parallel-tuned circuit and is most often used for general transmitter spurious clean-up or a sharpening of a single receiver front end selectivity with or without amplification. TX RX bandpass cavities (4", 6", 8” and 10") have adjustable selectivity characteristics (rotatable loops) to allow a trade-off between insertion loss (0.5-3.0 dB) and selectivity. Maximum power handling is typically determined by insertion loss setting.

  • Various Low-Loss High-Rejection Models to choose from.
  • All Loop Plate/connector assemblies are silver-or Alballoy®-plated for low IM.
  • Welded cavity construction and silver-plated tunable probe and loops give superior pass and reject characteristics.

11-70 Series, Cavity Filters

Number of Cavities
Model Number Cavity Size, diameter (inches) Diminsions, H x W x D (inches) Shipping Weight, lbs.
11-70-01 6.625 1 11.5 x 6.625 x 6.625 8
11-70-02 6.625 2 11.5 x 6.625 x 6.625 16
11-70-05 10 1 12.5 x 10 x 10 11
11-70-06 10 2 12.5 x 10 x 10 23
11-70-09 4 1 9 x 4 x 4 4
11-70-11 6.625 1 26 x 6.625 x 6.625 12
11-70-12 6.625 2 26 x 6.625 x 6.625 25
11-70-25 10 1 26 x 10 x 10 21
11-70-26 10 2 26 x 10 x 10 43
Cavity Filters
11-70 Series
Downloads: